Cellpack heat shrink thin wall 1.5mm-8mm red
Item Code: 3010255
Part Number: OMEXLP1.5-4RD
Thin wall heat shrink for insulating, bundling, or marking cables. Also provides protection from corrosion, pressure, and abrasion. Made from cross-linked polyolefin for superior electrical properties, high tensile strength, and thermal stability (resistance to cold flow). Inscribable, UV stabilised, non corrosive, and resistant to chemical agents. Self-extinguishing.
- Unit of Measure
- Length
- Material
- Cross-linked Polyolefin
- Colour
- Red
- Length
- 1.2 m
- Recovered Wall Thickness
- 0.43 mm
- Pre Shrink Inner Diameter
- 1.5 mm
- After Shrink Inner Diameter
- 0.8 mm
- Min Operating Temp
- -55 °C
- Max Operating Temp
- 135 °C
- Shrinkage Temperature
- > 90 °C
- Flexibility at Low Temperatures
- -55 °C
- Elongation at Break
- 350%
- Longitudinal Shrinkage
- ≤ 10 %
- Shrink Ratio
- 2:1
- Flame Propagation
- Self-extinguishing
- Corrosion
- None
- Resistance to Fungus and Decay
- No growth
- Dielectric Strength
- 20 kV/mm
- Specific Volume Resistivity
- 10^14 Ω x cm
- Tensile Strength
- 13 MPa
- Compliance
- RoHS
